How to Make a Bottle Kick Challenge AI Video From One Photo

By FYP FX editorial team · Published · Updated

Product details are based on the current FYP FX preset configuration and upload workflow. Visual references are identified in their captions. This guide does not report a generation test.

Show the full stance and both shoes

Create a generated bottle-stack challenge from one full-body photo: a single side kick, moving plastic bottles and a balanced finish. Use the Bottle Kick Challenge tool to create the clip, or read the effect introduction for the intended sequence.

Woman standing beside a low wooden stool holding a plastic bottle in an uncluttered room
A full-body view, low support and open floor show room for a kick. This preset generates a three-bottle stack and one controlled side kick. Source: SuperMaker. This is not a FYP FX-generated result.

The preset creates a silent, 5-second, 720p video for 284 credits. The scene uses a vertical 9:16 frame, regardless of the source photo’s orientation. Check the displayed quote before generating; five seconds is the finished clip length, rather than the processing time.

Step 1: Choose the reference for this sequence

Your photo is an identity reference for a newly generated scene. It does not set the opening video frame, source background or final crop.

The preset builds a new scene with a low table and a stack of lightweight plastic bottles. The photo guides the person’s face, outfit and body proportions; full-body framing helps the generated stance and kick.

  • Include one standing person from head to shoes.
  • Use a relaxed pose with legs and arms separated enough to read.
  • Keep the face sharp and avoid another person overlapping the body.

The full body matters more than a dramatic pose. Use a relaxed standing reference so both legs and their proportions are readable. The low table and three lightweight plastic bottles, stacked two below and one above, are generated; you only need a still person photo. Use a photo you have permission to use.

Step 2: Upload and start one generation

Open Bottle Kick Challenge, sign in and upload one JPG or PNG up to 20 MB. Wait for the upload to finish and check the preview against the photo guidance above. Confirm your balance covers 284 credits, then select Generate once.

There is no bottle-count, table-height, kick-angle or choreography selector. Processing can take several minutes. If progress stops updating, check My videos and your balance before submitting again. Contact support if the status remains unclear.

Step 3: Review the full action and ending

The generated person stands beside a low table with lightweight plastic bottles stacked on it. The preset asks for one side kick that dislodges the bottle stack, with the rest of the body kept balanced. The kicking leg returns to the ground and the person settles into a short finishing pose. These are the intended actions; generated timing, identity and object motion can differ.

Watch the full clip once at normal speed, then replay the contact points and ending:

Check What to review
Setup The low table and three-bottle stack are coherent before the kick.
Supporting leg One leg supports the body while the other makes the single side kick.
Contact and bottles The kicking foot reaches the stack, and the bottles move without becoming fused to the shoe.
Recovery The leg returns and both feet settle into a balanced stance, without an extra kick or floating foot.

If the leg or recovery is unclear, use a cleaner full-body reference with separated limbs. A waist-up source forces the model to invent the missing legs and shoes. Each new generation uses credits, and a different source does not guarantee a corrected result.

Step 4: Download and finish the timing

Use Download video in the studio, or open the completed result in My videos. After downloading, align a short impact sound with the bottle contact, then keep enough of the recovery to show the ending balance.

Music, captions and trims are editing steps after downloading. If you share the result, identify it as AI-generated so viewers understand that the scene or movement is newly created.

FAQ

Is this a ground-bottle tap or a bottle-cap challenge?
Neither. This preset requests a side kick toward a table-top stack of lightweight plastic bottles, followed by a return to standing.

Do I need to perform the kick for the upload?
No. You upload a still standing photo. The kick, table and bottles are generated.

Can I use a waist-up portrait?
A full-body reference better matches this preset. A crop without legs makes the model invent the stance, shoes and kick.

Choose a suitable photo and create a Bottle Kick Challenge video. The effect introduction has a quick summary of the photo requirements and limitations.